10% OFF WHEN YOU BUY 2 OR MORE SCOOTERS TOGETHER | USE CODE AUGUST10 | EXPIRES 31/08/2020

Search

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

How to repair a Mini Micro scooter

  • 2 min read
Do you need instructions on how to make a repair to a Mini Micro scooter? It is easy to repair, replace or revamp all parts on your Mini Micro scooter as we stock replacement parts for the entire scooter. This post will show you and give you written step by step instruction on what to do if the brake of your Mini Micro has broken, gives instructions on how to replace the brake on a Mini Micro scooter and will show you how to replace the handle grips on a Mini Micro scooter. Broken Brake on Mini Micro scooter If your Mini Micro brake has broken/snapped it will not be able to be fixed and will need to be replaced. To replace a brake, the spare part you will need is AC7001B. Find the link below for Mini Micro brakes: http://www.micro-scooters.co.uk/mini-micro-scooter-brake-1.html How to replace the brake on your Mini Micro scooter Step one: Firstly, remove the handle bar and deck. Step two: Remove the screws from the brake at the base of the scooter. Step three: Remove your old brake and put your new one into place. Step four: Place the screws into position, then hold the screws in place and flip the scooter over. Step five: Once the scooter is turned over and you are still holding the screws in place, put the bolts into place and hold them there. Step six: Turn the scooter back over and tighten the screws. Step seven: Lastly, make sure your new brake is secure. Then put your deck and handlebars back into position. This video will show you how to replace the brake on a Mini Micro scooter How to replace the grips on your Mini Micro scooter To replace the grips on your Mini Micro scooter you will need part 1068. Find the link below for grips: http://www.micro-scooters.co.uk/micro-handle-grips-for-mini-maxi-scooters.html Replace your Mini grips in two easy steps. Step one: Remove the old grips by pulling them off in a twisting motion. Step two: Put the new grips on by pushing them onto the handle bar in a twisting motion. This video shows you how to replace the grips on a Mini Micro scooter We make it easy to repair or revamp your Mini Micro scooter by stocking spare parts for the entire scooter. It means, rather than buy a new scooter it can be easily repaired. Buy replacement parts for your Mini Micro scooter here >> See all our instructional videos showing you how to mend your Mini Micro scooter >> We hope this guide has been useful please let us know in the comments below.

Search